CUTTING SERVICE
We can cut the 3030x1200x20mm sheets of furniture board to give you doors, draw fronts, cover panels and plinths. Sawing a sheet costs £50 plus VAT.
FINISHED SIZES
We cut doors 3mm smaller all round to give you a gap for the door to swing. If you request a door to suit a 600mm x 400mm, it will come 597mm x 397mm. Panels will be dead size.
If you want us to cut your doors to size, email your cutting list to info@laminateandply.com
EDGE FINISHING
The edges are left unsanded and unsealed and will require finishing on site. A “how to” guide on edge finishing is available on our how to page.
DRILLING FOR HINGES
We default to a 35mm diameter hole, 13mm deep, centred 22mm from the edge. If you need somethng different please advise. We do need you to confirm how many holes and their location referencing the top of the door. Typically we charge £10 a door to drill for hinges. A “how to” video is available on our how to pages.
Finger Pulls
We have a tool to apply a groove along the top or side of the door.
Typically this costs £5 per door plus VAT onto top of the sawing.
For an accurate quote email your requirements to info@laminateandply.com
MITRE CUTS
We don’t offer to mitre cut as the 45 degree edge is too difficult to protect through transport to site. A how to video is available on our how to page.
